Corten Steel Plates
Corten Steel is a high-strength weathering steel, often referred to in industrial specifications as Cor 10. This unique alloy is engineered to develop a stable, rust-like “patina” when exposed to the elements, which acts as a self-protecting barrier. Jitu Milan Steels supplies this material in various forms, including plates, coils, and structural sections, adhering to equivalent standards such as ASTM A588, A242, and A606-4.
The primary advantage of Corten Steel is its exceptional atmospheric corrosion resistance, allowing it to be used without paint or external coatings. This “self-healing” property not only creates a distinct brown-orange aesthetic but also significantly reduces long-term maintenance and recoating costs. Its high structural integrity makes it ideal for bridges, storage tanks, exhaust systems, and architectural frames where durability and a natural finish are essential.
We deal in all sizes is from 1mm to 100mm as per client's requirements.
Corten Steel Plate Grades
- ASTM A242
- ASTM A588 GR.A/B
- ASTM A606-4
- ASTM A709-50W
- A709-50W
- Corten A/B
- S355J2W+N
- IRSM 41-97
- Sailcor
- S355K2G1W Corten Steel Pipe & Tube
Specifications
Material : Corten A, Corten B , S355J0WP, S355J0W, S355J2W, A588 Grade A, A588 Grade B, A242 Type 1 A242 Type 2, ASTM A606 Type 1 , ASTM A606 Type 2
Thickness : 1.5mm – 100mm
Width : 1000mm – 3000mm
Length : 2500mm- 12000mm
Uses : Corten steel is used in external and internal cladding for any building, Bridges, Containers and more usages.
| Grade | C % | Si % | Mn % | P % | S % | Cr % | V % | Ni % | Cu % |
| A588 Gr A | 0.19 | 0.30-0.65 | 0.80-1.25 | 0.04 | 0.05 | 0.40-0.65 | 0.02-0.10 | 0.40 | 0.25-0.5 |
| A588 Gr B | ≤0.20 | 0.15-0.50 | 0.75-1.35 | 0.040 | 0.050 | 0.40-0.70 | 0.01-0.10 | ≤0.50 | ≤0.50 |
| Grade | C | Mn | P | S | Si | Cr | Ni | Mo | Cu | Fe |
| IRSM 41-97 | 0.10 | 0.25-0.45 | 0.075-0.112 | 0.030 | 0.28-0.72 | 0.35-0.49 | 0.20-0.49 | – | 0.30-0.39 | – |
| Grade | C | Mn | Cr | Si | CEV | S | Cu | P |
| ASTM A242 TYPE 1 | Max 0.12 | Max 1 | 0.3-1.25 | Max 0.75 | Max 0.52 | Max 0.03 | 0.25-0.55 | 0.06 – 0.15 |
| ASTM A242 TYPE 2 | 0.20 Max | 1.35 Max | 0.3-1.25 | – | – | 0.05 | 0.20 Min | 0.04 |
| Grade | C | Si | Mn | P | S | Al | V | Cu | Cr | Ni |
| CORTEN A | 0.12 max | 0.25 – 0.75 | 0.20 – 0.50 | 0.07 – 0.15 | 0.030 max | 0.015 – 0.06 | – | 0.25 – 0.55 | 0.50 – 1.25 | 0.65 max |
| CORTEN B | 0.19 max | 0.30 – 0.65 | 0.80 – 1.25 | 0.035 max | 0.030 max | 0.020 – 0.06 | 0.02 – 0.10 | 0.25 – 0.40 | 0.40 – 0.65 | 0.40 max |
| S355J2W+N Chemical Composition | ||||||||||
| C | Si | Mn | P | S | Cr | Zr | Ni | Cu | Mo | CEV |
| 0.16 max. | 0.50 max. | 0.50 max. | 0.03 max. | 0.03 max. | 0.40-0.80 | 0.15 max. | 0.65 max. | 0.25-0.55 | 0.03 max. | 0.44 max. |
| Grade | C | Mn | Ph |
| ASTM A606-4 | 0.22-0.26 | 1.25-1.3 | 0.04-0.06 |
| Steel Grades | C max | Si max | Mn | P max | S max | Cu max | Cr max | Ni max | V max | Nb max | Al min |
| A 709 Gr.50W | – | – | – | 0.035 | 0.035 | – | – | – | – | – | 0.020 |
| GradeCorten IRSM 41-97 | C | Mn | P | S | Si | Cr | Ni | Mo | Cu | Fe |
| 0.10 | 0.25-0.45 | 0.075-0.112 | 0.030 | 0.28-0.72 | 0.35-0.49 | 0.20-0.49 | – | 0.30-0.39 | – |
| Grade | Thickness | Yield Strength ReH[N/mm2]transv.min | TensileStrength Rm[N/mm2]transv |
| ASTM A588 | 0mm-100mm | 340 MPa | 480 MPa |
| 102mm-127mm | 320 MPa | 460 MPa | |
| 127mm-203mm | 290 MPa | 430 MPa |
| Grade | Standard | Tensile Strength MPa | Yield Strength MPa | Elongation in 2 inches (min.) % |
| IRSM 41-97 | Indian Railways | 480 min345 | 340 min | 21 |
| Grade | Min. Yield Strength Mpa | Tensile Strength MPa | Impact | ||||||||
| A242 Type1 | Nominal Thickness (mm) | Nominal Thickness (mm) | degree | J | |||||||
| Thick mm | ≤16 | >16 ≤40 | >40 ≤63 | >63 ≤80 | >80 ≤100 | >100 ≤150 | ≤3 | >3 ≤100 | >100 ≤150 | -20 | 27 |
| A242 Type1 | 355 | 345 | …. | …. | …. | …. | 510-680 | 470-630 | …. | ||
| A242 Type 2 | |||||
|
Properties |
Conditions |
||||
|
T (°C) |
Treatment |
||||
| Density (×1000 kg/m3) | 7.7-8.03 |
25 |
|||
| Poisson’s Ratio | 0.27-0.30 |
25 |
|||
| Elastic Modulus (GPa) | 190-210 |
25 |
|||
| Grade | Yield strength ReL (N/mm 2) Min. | Tensile Strength Rm (N/mm 2) Min. | Elongation A50% Min. |
| COR-TEN A | 345 | 485 | 20 |
| COR-TEN B | 345 | 485 | 19 |
| S355J2W+N Mechanical Properties | |||
| Yield Strength | Tensile Strength | Minimum Elongation A (Lo = 5.65 vSo) % | |
| 355 MPa | 510 – 680 MPa | 20 | |
| Grade | Tensile Strength ksi | Yield2% Offset ksi |
| ASTM A606 TYPE 4 | 50 | 70 |
| Grade | Thick mm | Yield[MPa] | Tensile [MPa] | Elongtation Min % | reduction Min % | HB | |||
| Steel Plate | Structural steel | ||||||||
| 8in[200mm] | 2in[50mm] | 8in[200mm] | 2in[50mm] | ||||||
| A 709 Gr.50W | ≤100 | 345min | 485min | 18 | 21 | 18 | 21J | … | |
| Grade | Standard | Tensile Strengtd MPa | Yield Strengtd MPa | Elongation in 2 inches (min.) % |
| IRSM 41-97 | Indian Railways | 480 min345 | 340 min | 21 |